Outstanding advantages, high current stabilization accuracy, and constant output current.
It can be used for automatic test of different current levels and cyclic test operation.
Frequency adjustable range: fixed frequency 50Hz/60Hz, frequency modulation 45Hz~65Hz.
It can carry resistive, inductive and capacitive loads to meet the requirements of low-voltage electrical appliances for test power supply.
The output current is constant, and the output waveform is a pure sine wave, which can be used as an over-current test instrument.
Product Overview:
HCT series is a stable current source with wide frequency spectrum, high accuracy, low harmonic and
distortion. The constant current source is an AC power source that can keep the output current constant
when the external power supply fluctuates or the impedance characteristics of the power supply are
changed. The power supply is mainly used in products and places where specific current thermal effects
are applied and tested. For example, circuit breakers, fuses, thermal relays, magnetic starters, coils, etc.
need to be tested.
Product features:
(1) When constant current and voltage are used, it can automatically cross transform to maintain the
characteristics of both control and protection.
(2) The output current is constant, and the output waveform is a pure sine wave, which can be used as
an over-current test instrument.
(3) It can carry resistive, inductive and capacitive loads to meet the requirements of low-voltage electrical
appliances for test power supply.
(4) Outstanding advantages, high current stabilization accuracy, and constant output current.
(5) It can be used for automatic test of different current levels and cyclic test operation.
(6) Frequency adjustable range: fixed frequency 50Hz/60Hz, frequency modulation 45Hz~65Hz.
Product picture:
Technical parameters:
Product application:
AC air switch, AC contactor, mechanical switch, electronic switch, AC transformer, thermal relay, molded case circuit breaker, small
circuit breaker, rated current action current and short-circuit protection current that need to be set, automatic detection and
calibration bench, and current requirements testing site.